In this Era the internet is fast growing and each and everyone of us depend on the internet but we may get bored with our slow connection or we may have multiple Internet connections like Wi-Fi, Ethernet, 3G/4G cards, tethered smartphones, etc. and we cant combine Two Internet Connections.
To overcome this we will show you a method to combine two internet connection(even more) ,so that our speed will be increased(doubled or tripled).For this we need a software called connectify dispatch(download it from the link below).
Dispatch works when your computer is connected to multiple Internet connections like Wi-Fi, Ethernet, 3G/4G cards, tethered smartphones, etc.
For the fastest performance, don’t connect to two networks that use the SAME Internet connection (ex: wired and wireless to the same router), since that Internet connection could become a bottleneck.
1.Connectify Dispatch.[button color=”orange” size=”medium” link=”http://www.connectify.me/dispatch/” target=”blank” ]Download [/button]
2.One or more internet connections(e.g. Wi-Fi, Ethernet, 3G/4G cards, tethered smartphones, etc).
Tips about Connectify Dispatch :
1.When Dispatch is running, the Adapters Table will show adapters (your Internet connections) that Dispatch is currently able to use. When the window resizes, some data may be hidden from the table.
This data can be viewed by expanding the row with the + icon.
2.Dispatch allows you to specify how it should use each adapter.
Adapters will default to PRIMARY, which means that Dispatch will try to use the adapter whenever it is available.
BACKUP adapters are used when there are no working PRIMARY adapters.
To tell Dispatch to ignore an adapter, set it to NEVER.
3.It monitors and displays the bandwidth, latency, and reliability of each Internet connection. The application uses this information when deciding how to balance your Internet traffic.
4.You can stop Dispatch from measuring by providing an override bandwidth value for an adapter. Click on the Total Bandwidth value for the desired adapter and enter the bandwidth value that you would like Dispatch to use. This will also stop Dispatch from measuring latency and reliability on that adapter.
5.The Dispatch graph shows the throughput for each individual adapter and the combined throughput of all adapters with the black line.
Tip: You can hover over the adapters in the Adapters Table and the graph will highlight the data for that adapter.
The green line on the graph shows the bandwidth of your fastest adapter. When the black line is above the green line, Dispatch is giving you more speed than your fastest connection could by itself.
6.The ‘Current Total Throughput’ pane shows you the combined throughput from all adapters (which is the same as the current value of the black line on the graph). The ‘Top Total Throughput’ shows the best combined throughput that you have achieved during this Dispatch session.
1.The main thing we need is connectify dispatch , make sure that you download it from the link provide.
2.Get connected to your networks(atleast two is needed).
3.Install the software and open it.
4.Click on the dispatch tab provided.This will you give a notification that “the connectify dispatch has started” which means that your networks are combined and you can use all of them simultaneously.
If you have any problem see the video on the top of this page.
For queries comment below.